Injector cleaner for gasoline engines CHEMIPRO 1 l

A cleaning agent for removing resinous-varnish contaminants and deposits in petrol injection systems. It is used for non-disassemblable flushing of the system with special flushing stations.

PROPERTIES / CHARACTERISTICS:
• Restores the spray pattern of injectors
• Reduces fuel consumption
• Eliminates uneven engine operation at idle and low speeds
• Facilitates cold starting
• Eliminates jerks during acceleration, slow response to pressing the accelerator pedal and engine smoke caused by contamination of the fuel system
• Reduces toxicity of exhaust gases (CO and CH)
• Safe for the catalyst and spark plugs
• The consumption of the working fluid is about 1 liter for an engine with a volume of up to 2.0 liters
• The procedure does not require dismantling the injectors
• Does not require replacing the oil and spark plugs
• The composition is safe for any type of flushing stations
• Suitable for all types of injection systems of gasoline engines.

APPLICATION SCOPE:
Suitable for use in petrol engines with electronic injection systems of any type. The product is used with a flushing station.

APPLICATION:
Suitable for both independent use and as a service tool.
Warm up to room temperature before use.
1. Shake thoroughly
2. Connect the flushing station
3. Pour in the product, set the pressure to 3 atm
4. Start the engine and let it idle for 10-15 minutes
5. Turn off the engine for 10-15 minutes to dissolve the deposits
6. Start the engine
7. Use up the liquid, periodically smoothly increasing the speed to 1500-2500 rpm.

Do not pour into the fuel tank.