Engine flush 5-minute CHEMIPRO 0.28 l

A specialized composition for adding to engine oil before replacing it. It has a complex effect on the lubrication system. It promotes maximum drainage of used oil.
The dispersing property ensures the removal of contaminants formed in the engine during operation.

PROPERTIES / CHARACTERISTICS:
– Used to flush lubrication systems of all types of gasoline and diesel engines of passenger cars.
– Suitable for both independent use and as a service agent.
– Engine flush: the packaging is designed for an oil system with a volume of up to 4 liters.
– Recommended for use before each oil change and after engine decarbonization.
– Recommended for systematic use with a mileage of 20,000 km.
– Does not clog the oil receiver and oil system channels.
– The composition is safe for rubber products and paintwork of the oil pan.
– Compatible with all types of motor oils.
– Suitable for flushing gearboxes and manual transmissions.
– Shelf life: 5 years.

APPLICATION SCOPE:
Suitable for both independent use and as a service tool. The packaging is designed for an oil system with a volume of up to 4 liters.
Recommended for use before each oil change and after engine decarbonization.

APPLICATION:
1. Warm up the engine to operating temperature.
2. Pour the composition into the oil filler neck and start the engine.
3. Let it idle for 5 minutes. Do not drive the car!
4. Turn off the engine and drain the used oil.
5. Replace the oil filter and add new oil.